|
 The
S1 Vivaldi II ( Plumbed in Direct Water Connection )- Single Group, Dual
Boiler espresso machine is loaded with features and stylish. The machine
is direct plumbed so refilling water is a thing of the past. The Vivaldi
II
features one boilers for excellent performance. The large 2.5 liter steam
boiler will make frothing and steaming milk. A separate brew boiler keeps
the correct brew temperature ready and waiting.
The implementation
of the electronically controlled dual boiler design allows end users the
flexibility of completely shutting off the heating element of the steam -
hot water boiler at the touch of a button when only espresso brewing is
desired.
The Vivaldi II has a temperature gauge with
increments of 1 degrees 97 to 97 Celsiuis. Also added Programmable
Offset Differential, Programmable Passive Pre Infusion, and had a New
optional steam tip with smaller .9 mm holes made.
The new temperature sensing probe is actually submerged directly
into the boilers. This probe has proven to be more reliable than the
previous style and has a quicker reaction time.
91C = 195.8F
92C = 197.6F
93C = 199.4F
94C = 201.2F
95C = 203.0F
96C = 204.8F
97C = 206.6F
NEW FEATURES OF Vivaldi II
from Vivaldi I:
Programmable Passive Pre Infusion All machines shipped
after June 26th of 2008 have the capability to program Passive Pre
Infusion anywhere from 1 to 8 seconds. This is the same type of pre
infusion used on some of the most expensive machines on the market. It
differs from pre infusion on an E61 machine in so much as you control the
time of the pre infusion as well as the amount of water you pre infuse
with. You have no control of the pre infusion on an E61 Group. You can set
this for what works best for you and your coffee. Once you set it where
you like it, there is nothing you have to do except press the the button
to start the brew cycle.
Programmable Off Set DifferentialThis allows you to set
the LED temperature setting on the front of the machine to be equal to the
temperature being delivered at the group rather than the temperature
inside the group boiler. Note: We set it during the bench test of each
machine prior to shipping so you don't have to invest in the expensive
equipment necessary to perform the tests and setting.
Dual Manometer It is no longer necessary to purchase a
portafilter with a pressure gauge to either check or make adjustments to
your pump's output pressure.
Now able to put on a timer There is cord inside to plug in an
OPTIONAL 7 day programmable timer into it. You can have the machine come
on and go off at different times on different days.
NOW STANDARD EQUIPMENT -9mm 4 hole steam tip - With this
New .9mm 4 hole steam tip it makes this machine one of the easiest to
produce excellent micro foam fast and easy even with small quantities of
milk
Decreased delta What does that mean? The previous model
would need to detect a temperature drop of one degree Celsius before the
heater would be activated. The NEW Vivaldi II activates the heater with
the detection of a temperature drop of just one half degree Celsius.
Simply put, it makes the temperature accuracy that much more precise in
the group boiler and enhances the steam boilers performance.
Updated temperature sensing probe The new probe is actually
submerged directly into the boilers. This probe has proven to be more
reliable than the previous style and has a quicker reaction time.
New LED display The previous display showed 5 degree
increments, from 85 to 120 degrees Celsius. The NEW Vivaldi II displays in
1 degree increments, from 91 to 97 degrees Celsius.
91C = 195.8F
92C = 197.6F
93C = 199.4F
94C = 201.2F
95C = 203.0F
96C = 204.8F
97C = 206.6F
Weight:
65 lbs.
Authorized
Canadian Dealer
|
.gif)
