|
The Ascaso
Stainless Steel grinders are the only grinders currently available that
have a Micrometric Regulation System (MRS) to control the quality and
consistency of the grinds. This system allows for unmatched, precise
adjustments to the grind setting, which is critical for espresso grinding.
You can grind coffee for drip, French press, Turkish, and espresso. If you
have an espresso machine, you will enjoy. The I -1 is a Flat burr
version and the I-2 is a Conicial cone version. Small in size but not in
grinding power
- Simple Manual Operation
- On the side of the grinder there is a button that you can control the
main power. Just under the coffee dispensing chute, another spring-loaded
manual on/off button is present, and when pressed, the grinder will start,
then immediately turn off when the button is released. Place the coffee
holder (or any storage container) against the button to start grinding and
then remove the coffee holder when the desired amount of coffee has been
dispensed.
- No Coffee Dispenser
- The grinders feature a coffee chute which funnels the freshly ground
coffee from the grinding chamber directly into a coffee holder for your
espresso machine or into a coffee filter, or even a storage container.
- Easy to Clean
- One important and often overlooked task required of owning a good coffee
grinder is routine cleaning. To clean, just remove the coffee bean hopper
and cover to expose the grinding chamber, which takes about 30 seconds.
You can perform a thorough cleaning to remove built up coffee grounds
around the main cutting wheel and then reassemble the grinder - total time
is about 2 minutes.
Specifications:
- Motor Power: 250 Watts.
- RPM: 700 rpm.
- Blade Diameter: 54 millimeters.
- Volts: 120 Volts.
- Body Material: Inox.
- Bean Hopper Capacity: 250 grams.
- Weight: 4.8 kilograms.
- Measurements: 340mm H x 120mm W x 225mm
D.
- Production: 5 kilograms per hour.
- 1 year Warranty:
|
.gif)
